Cooling Towers

Related Products

SMP Series

SMP Series

SMP Series

SMP Series

SF Series

Fiberglass Cooling Towers

The SF Series Cooling Towers offer unparalleled corrosion resistance, energy efficiency, and performance. For cooling requirements at 85°F (29.4°C) and above, water consumption may be reduced by 98.5% through the use of cooling towers to remove process heat. Sterling Cooling Tower Systems are used wherever a reduction in water usage, water costs, and/or control of mineral precipitation associated with cooling towers is desired.

Selected Features

Resources

Technical Specifications


  • High efficiency induced-draft design
  • Balancing valve and pressure gauge
  • Factory-tuned fan blade pitch
  • PVC fill and Drift eliminators with ultraviolet (UV) protection
  • Totally-enclosed non-ventilated TENV energy-efficient fan motor
  • Vertical air discharge
  • Large inspection/access door
  • Anti-clog ABS nozzle(s)
  • Stainless steel hardware
  • Bottom outlet (requires a 24” [61 cm] - minimum support base under the tower)
  • Lightweight non-corrosive fiberglass shell with fiberglass side seams
  • Exterior gel coat/UV inhibitor
  • 2 year warranty on parts
  • 1 year on fan motors
  • 1 year warranty on labor (North America only)
  • 10 year shell warranty
  • 460/3/60 or 230/3/60 starter package, including starter, on/off switch, thermostat, and well (consult factory for 208V or 575V)
  • Basin reservoir, to be used where the basin of the tower serves as a reservoir. It is not necessary to purchase this package where an inside reservoir is used. The parts consist of a 0.75” automatic float valve, water outlet basket strainer, and overflow connection (Not recommended for bottom outlet towers).
  • Heater, used with basin reservoir option to guard against freeze-up when system is shut down. Includes heater and low water heater shut off
  • Factory startup, including checking motors, flow, adjusting nozzles. Towers must be installed and connected, including all piping and electrical hookups before Sterling arrives on site.
  • Access ladder, meets OSHA requirements (shipped loose for field installation)
  • Side outlet configuration available at no charge
2900 S. 160th St.
New Berlin, WI 53151
P: 262-641-8600
© 2016 ACS Group - All Rights Reserved.