Water

Related Products

SMP Series

SMP Series

SMP Series

SMP Series

TDV Series

Positive/Negative Water TCU

Troublesome cooling circuit leaks in processes can result in serious production losses. The leaks may be due to small stress cracks, which leak under pressure. Our Positive/Negative Pressure TCU uses a liquid venturi to draw cooling water through the mold under negative pressure.

Precise temperature control is provided by the operation of a solid state or microprocessor controller, which activates a heater or a cooling water solenoid as required.

Selected Features

Resources

Technical Specifications


  • Off-the-shelf microprocessor-based PID temperature control with Process and Set Value LED readout
  • Graphic control panel with indicating and warning status lights
  • Operating range of 32ºF to 180ºF (0ºC to 82ºC)
  • Open reservoir vented to atmosphere
  • Single stage Incoloy™ immersion heater with IEC mechanical contactors
  • 1/4” cooling solenoid valve (Cv=0.85)
  • Hi/low level sensor with 3/8” makeup solenoid valve
  • Low supply water pressure switch
  • 150 psi (10.3 bars) pressure relief valve
  • 2” (5 mm) casters
  • 3/4” cooling water connections
  • Manually-operated 3-way valve for changeover to negative pressure mode
  • Centrifugal pump
  • 1-year warranty on parts and labor at factory
  • 5-year warranty on controller
  • Lifetime warranty on pump housing, impeller, heater tube, piping
  • 460/3/60 or 230/3/60 standard operating voltage
  • 9 kW heater
  • Remote control enclosure (see next page for details)
  • Remote thermocouple (10 ft), remote sensor must be sold with the high temperature safety switch option
  • Rubber feet in lieu of casters
  • High temperature safety switch
  • High/low temperature audible and visual alarm, no heater contactor interlock, visual alarm is a strobe
  • Crash cool, holds cooling solenoid on, turns heater off regardless of control setting
  • 208/230/460 volt 60 Hz, 380/415 50 Hz, consult factory for de-rated heater and pump capacities.
  • Pressure gauge (specify locations)
  • Power cord, 10 ft., no plug
  • Closed circuit with open reservoir
  • 0.375” solenoid valve (Cv=1.5) in lieu of 0.25” valve
  • Modulating valve, 0.5” (Cv=4.4), 0.75” (Cv=7.5), 1” (Cv=10 or 14), or 1.25” (Cv=20), includes VDC actuator. mA actuator is also available. Consult factory for maximum operating ÆP for cooling water
  • External communications, types RS-232C, -422, -485, single point
  • Cooling water in strainer
  • Side-by-side (2 zone) w/casters, valving not included
  • Severe duty EPDM silicon carbide, 2-3 hp
  • NEMA 1 or NEMA 3R disconnect with fuses

AEC is proud to offer Quick Ship options for the products listed below. Call our Inside Sales Team at (262) 641-3987 or by emailing quickship@acscorporate.com for help selecting the right product or to place an order for any of the products listed below.

Orders submitted before 3PM CST will ship same business day in most cases.


Positive Negative Pressure TCU (TDV-1NX)

  • Operating Range of 32F to 180F (0C to 82C)
  • Eurotherm
  • 2hp
  • 9kW
  • 1/4” solenoid valve
  • Hi Temp Safety Switch
  • 460/3/60 Voltage

TCU.TDV.200.9.1.4.1


2900 S. 160th St.
New Berlin, WI 53151
P: 262-641-8600
© 2018 ACS Group - All Rights Reserved.